To replace rotten exterior beams with concrete, you will first need to remove the existing beams by cutting or prying them out. Next, you will need to prepare the area by ensuring it is clean and level. Then, you can construct formwork to mold the concrete into the desired shape and size. Finally, pour the concrete into the formwork, allow it to cure properly, and then remove the formwork to reveal the new concrete beams. **

To build an exterior concrete wall using construction tile adhesive, the first step is to prepare the surface by cleaning and leveling it. Then, the adhesive is applied to the back of the concrete tiles and pressed firmly onto the wall. The adhesive is allowed to set and cure, creating a strong bond between the tiles and the wall. Finally, grout is applied to fill in the gaps between the tiles and provide a finished look. This method provides a durable and weather-resistant exterior wall. **

One way to make normal concrete waterproof is to add a waterproofing admixture to the concrete mix. This admixture can help to reduce the porosity of the concrete, making it more resistant to water penetration. Another method is to apply a waterproofing sealer or coating to the surface of the cured concrete. This can help to create a barrier that prevents water from seeping into the concrete. Additionally, using a lower water-to-cement ratio in the concrete mix can also help to improve its waterproofing properties. **

To waterproof the exterior wall of a house, you can start by inspecting the wall for any cracks, gaps, or damage that could allow water to seep in. Seal any cracks or gaps with a waterproof sealant or caulk. Consider applying a waterproofing membrane or coating to the exterior wall to provide an extra layer of protection against moisture. Additionally, make sure that the gutters and downspouts are functioning properly to direct water away from the house. Finally, consider landscaping around the house to ensure that the ground slopes away from the foundation, preventing water from pooling against the exterior wall. **

Not all houses from the 1960s contain asbestos in their exterior plaster and deeper concrete. Asbestos was commonly used in construction materials during that time, but it was not universally used in all buildings. It's important to have a professional inspection to determine if asbestos is present in a specific property, as it can pose health risks if disturbed. If asbestos is found, it should be safely removed by a certified abatement professional. **

Yes, you may compact the concrete slabs. Compacting the slabs will help to ensure that they are properly settled and will provide a more stable foundation. However, it is important to use the appropriate compaction equipment and techniques to avoid damaging the slabs. Additionally, it is important to follow any specific guidelines or recommendations provided by the manufacturer or engineer to ensure the best results. **

To waterproof an old concrete swimming pool, you can start by thoroughly cleaning the surface to remove any dirt, debris, and old sealant. Then, you can apply a waterproofing sealant specifically designed for concrete surfaces. This sealant will create a protective barrier against water penetration and help prevent leaks and cracks. Additionally, you can consider applying a waterproofing membrane or coating to provide extra protection. It's important to follow the manufacturer's instructions and ensure the surface is properly prepared before applying any waterproofing products. **

Without further context, it is difficult to determine whether the exterior facade is frozen. If the question is referring to the temperature causing the facade to freeze, then it would depend on the current weather conditions. If the question is asking whether the facade is unchanging or stagnant, then it would require more information about the specific situation. **